Summary

  • 723 – A New Partial Discharge Testing Method for Isolated Phase Bus and a Case Study
  • 724 - Vulnerability of Sound Barrier Enclosure to Failure of Large Auto Transformer
  • 726 – A Novel Built-in Insulation Condition Monitoring System Enabled by Dry Type Technologies
  • 727 - Voltage Fluctuations Caused by Cloud Transients in Distribution Systems with PV Generators
  • 729 - Impacts of High Frequency Harmonics on Power Systems
  • 731 - Back to back switching of underground cables and capacitor banks – concerns and mitigation measures
  • 733 - HVDC Grid Power Flow Controller Using Dynamic Droop Control Method
  • 735 - Condition Assessment and Reliability Evaluation of Utility Wood Poles Using Fuzzy Logic and Monte Carlo Simulations
  • 736 - An Innovative Application of PMUs for Generation Shedding
  • 737 - Transmission Line Criticality Ranking Process
  • 738 - Assessment and Mitigation of Corrosion Risk in Transmission and Distribution Structures
  • 739 - A Study of Fault Location Method in Double Wye Shunt Capacitor Banks
  • 743 - Methodology for Developing Transmission Line Components Failure Curves
  • 744 - A Probabilistic Approach for Economic End-of-Life Analysis of Circuit Breakers
  • 745 - Comparison of Different Approaches for Estimating Condition of Overhead Transmission Line Conductors
  • 746 - Replacing Aging 735 kV Insulators with Modern Equivalents – A Case Study
  • 748 - Estimating Extreme Ice on Power Line by Modified Gumbel Distribution
  • 751 - Power System Operation with Large Scale Wind Energy Integration
  • 752 - Underground Sensing and Communicating System for MV Distribution Networks
  • 753 - A Comprehensive Evaluation of “DC” Power Flow Models and their Application to Power System Security Analysis
  • 754 - Dynamic Models for Electric Power Systems in Renewable Integration Studies
  • 755 - Evaluation of Stand-alone PV and Battery Inverters Performance for Supplying Common Household Appliances
  • 756 - Investigation of Grounding Electrode Impedance Variation on the Voltage and Phase Angle of Three Phase Shield Wire
  • 757 - Distributed generation long-term planning in unbalanced smart distribution systems using hourly optimal operation
  • 758 - Investigation of Smart Inverters
  • 759 - Seismic Considerations for Electrical, Protection and Control Equipment in Generating Stations
  • 761 - High Power Density 22MW Trailer Mounted Load Bank
  • 762 – Impact of Earthquakes on Indian Power System
  • 763 – Cyber Security Analysis of Islanded Microgrids Controllers
  • 764 – Tele Protection ensuring highest performance of the protection system using packet switched wide area networks (D2/B5)
  • 765 - Methods to Improve the Grid Resiliency under the Influence of GIC
  • 766 - The Application of Volt/VAr Optimization on Medium Voltage Distribution feeders
  • 767 - Optimal placement and sizing of distributed generation units by multi-objective genetic algorithm in Chilean electrical networks
  • 768 - Performance Evaluation of Traction and Utility Network Interface: Fault Location and Protection Coordination
  • 769 - Analysis of how standards compliant bushings in Cape Spear and Mahikeng align with changing environmental regulations
  • 771 - Power system transients analysis based on rotational invariance technique
  • 773 - Application of Unmanned Aircraft Systems (UAS) in Transmission Line Inspection
  • 774 – Providing Secure Multi-Vendor Device Management in a Vendor-Centric World
  • 775 – Unmanned Aerial Systems Use for Electric Transmission Line Operations
  • 776 - Access control: from default local device access levels to centralized managed role-based access control
  • 778 - Reliable and interoperable digital substation
  • 779 - Carrier Ethernet Technology in an Electric Utility’s Communications Network
  • 780 - Offshore Wind Power Sharing and Curtailment Control Strategy for Multi-terminal VSC-HVDC Transmission Systems
  • 781 - Vendor-independent solution implementation for SCADA, data visualization, and NERC CIP Compliance
  • 782 - Typical Canadian Medium Voltage Benchmark Network Model for Integration of Distributed Energy Resources
  • 783 - Major SVC upgrade in the Canadian 735 kV transmission system Emerging Technologies for Power System Applications
  • 784 - Dynamic modeling of STATCOMs and Hybrid STATCOMs for transmission applications
  • 785 - Multi-Functional Interphase Power Controller for Power Flow Control in the Power Transmission System
  • 787 - Transient Stability Assessment of BC Hydro Power System Using Decision Trees
  • 789 - The Way to a TransCanada Electric Transmission System
  • 790 - Substation Digital Data Acquisition using Merging Units – Choice of Architecture
  • 791 - Design, concept and cost of a IEC61850 Process Bus based Breaker Fail, Synchronism Check and Trip Coil Monitoring Application
  • 792 - Lessons Learned and Savings Achieved Commissioning, Testing, Maintenance of a process bus pilot project
  • 795 - BC Hydro Synchrophasor System for Wide Area Monitoring, Protection and Control – Functional Requirements and System Architecture Considerations
  • 796 - A Reduced-Order Model of a Hybrid Modular Multilevel Converter
  • 799 - Design Considerations of a Hybrid Cascaded Modular Multilevel Converter
  • 800 – Evaluation of BCIT’s Microgrid Control Functionality
  • 801 - Comparison of two Phasor-Based Impedance Scan Programs for Filter Performance Assessment for the Nelson River HVDC Northern System
  • 803 - Practical Techniques for Studying the Harmonic Impacts of Wind Farms
  • 804 - Operational Experiences with Electricity Generation from Wind Turbines in Challenging Cold Climate Conditions
  • 805 – Geo-magnetically Induced Currents, their True Impact, and Methods to Protect Against
  • 807 – Transformer reliability and dissolved-gas analysis
  • 808 - Connecting Asset Health Indices, Asset Probability of Failure, and Risk
  • 809 - Condition Monitoring - Data Driven and Knowledge Based Analyses
  • 810 – Optimal Sizing of Energy Storage Capacity for a Wind Power Generator to Reduce the Loss of Load Probability
  • 812 - Development of a Virtual Relay Model (VRM) of a Microprocessor Based Sub Harmonic Protection Relay
  • 813 - Interoperability of Protection Systems in High Voltage Direct Current (HVDC) Networks
  • 814 - Analysis of Transient Stability Enhancement of Power Systems Using VSC Systems
  • 815 - Suppressing Wind Farm Output Power Fluctuation and Improving Power System Stability Using Battery Energy Storage System
  • 816 - Managing Renewable Generation Efficiently with a Receding Horizon Optimization
  • 819 - Arc-fault protection gets ultra-fast with UFES integration in Low Voltage Switchgear
  • 820 - Series Compensation for Distribution Networks

Additional informations

Publication type Colloquia
Reference COLL_VAN_2016
Publication year 2016
Publisher CIGRE National Committee
Price for non member Free
Price for member Free
Colloquium - Vancouver 2016
Colloquium - Vancouver 2016