Session 2022 - SC D1 Package

Summary

Contents:

Videos

General

• Opening Ceremony
• Opening Panel
• Next Generation Network forum
• Women In Energy forum (2 videos)

SC D1

Group Discussion Meeting 1

Group Discussion Meeting 2

Tutorial D1.67 - Electric performance of new non-SF6gases and gas mixtures for gas-insulated systems

Documents PDF

Session Papers & Posters

• 10129    Simulation of Diffusion Behavior for New Insulating Gases
• 10176    Experience with Electrical Tests in UHVDC System for Safety Quantities Definition for Live Line Working
• 10177    Integrity Evaluation of Thermal Power Plant based on Carbide Precipitation Sequence
• 10178    Methodologies Development for Power Transformers Incipient Faults Prediction Related to Particles Contamination and Bubble Formation
• 10179    Oxidation Susceptibility of Insulating Mineral Oil and Natural Ester at Different Oxygen Concentrations
• 10180    Thermally Upgraded Kraft Paper Performance in Insulating System Using Natural Ester Tested According to IEEE STD C57.100
• 10181    Evaluation of the Electrical Performance of Insulation in High Voltage Equipment Under the Effects of Contaminants Usually Neglected on Ordinary Electric Field Calculations
• 10229    The Analysis for the Diagnosis Method about H2 Gas-Led Issue according to Stray, Catalytic and Chemical Reaction for transformers in Service
• 10269    Development and Implementation of Transformer Condition Monitoring Models for the Interpretation of Sensor and SCADA Data
• 10272    Power generation by unhealthy photovoltaic modules
• 10279    Research on the application of the environmentally friendly insulating gas CF3I in Electric power apparatus
• 10397    Machine Learning Algorithm Trained by the Duval Pentagons - A Simplified DGA Approach
• 10398    Effective Insulation Condition Assessment of HV and EHV Bushings under Critical Environmental and Operational Conditions
• 10399    Aging Assessment of High Accuracy Low Power Voltage Transformer
• 10400    Dielectric Performance of Aramid Pressboard in Insulating Liquid
• 10404    New Crosslinking Technologies for Polyethylene Insulated Power Cables
• 10406    Characterization of Extruded Material System for HVDC Cable Application
• 10498    Ageing Study on Glass Fiber Composite Rod of Silicone Rubber Insulators
• 10499    Acceleration in corona induced degradation of polymeric insulator under low atmospheric pressure
• 10500    Recommendations for IEC 60815-2 based on Functional Performance of Optimized HVCB Porcelain Insulators in Very Highly Polluted Environments
• 10606    Research on the Causes of Damage to High-Voltage Oil-Filled Equipment with a “Gas Blanket”
• 10607    Changing of the Insulating Characteristics of Mixtures (Mineral Oil and Synthetic Ester) During Prolonged Exposure of Elevated Temperature
• 10608    The Degradation Degree Control of the Hydrocarbon Base of Mineral Oils Using the Specific Degradation Marker in their Infrared Spectrum
• 10609    Universal Method for Assessing Oil-Filled Equipment Based on the Results of DGA
• 10610    The Application of Artificial Neural Networks in the Diagnosis of High-Voltage Circuit Breaker
• 10646    Nondestructive Terahertz and Millimeter Wave Imaging for Underfilm Corrosion
• 10647    The Evaluation Method of Static Electrification in Aged Power Transformers Using Cellulose Fibers Suspended in Insulating Oil
• 10648    Development of Sophisticated Cone-Type Insulating Spacer for 245 kV Class GIS by Functional Insulating Materials
• 10649    Nanofiller Dispersion Effect on Insulation Performances of Epoxy Nanocomposite Material: Electroluminescence, Breakdown Strength and Electrical Insulation Lifetime
• 10650    Joint R & D Project on the Development of Electric Power Equipment using new Functional Insulating Materials
• 10684    Diagnostic and testing on GIS voltage dividers for HVDC applications
• 10685    Impact of the residual quartz to the expected lifetime of C-130 alumina porcelain high voltage insulator
• 10828    Test methods and criteria for validation of functional properties of composite insulators related to materials and interfaces
• 10829    Mechanical strength of pressboard materials under dynamic compressive stress
• 10830    On-load tap changer monitoring and protection by extra power loss and circulating current analysis
• 10831    On-load tap changer switching sequence monitoring – comparison of methods
• 10883    Requirements for Ultra High Frequency Partial Discharge Monitoring Systems for Gas Insulated Systems
• 10951    Determination of Gas Solubility Coefficients for Dissolved Gas Analysis (DGA)
• 10982    Differences in ageing pattern and production/consumption of ageing markers in kraft and thermally upgraded papers immersed in mineral and natural ester oil
• 11027    Thermal faults simulation for aramid insulation in liquid immersed power transformers
• 11048    Fingerprinting and testing methods of RTV silicone-coatings for glass insulators
• 11049    Requirements for Artificial Intelligence Platform addressed to Automatic Assessment of Insulation Condition of Indoor and Outdoor Installations through Partial Discharge Monitoring
• 11050    Optimized deployment of online partial discharge monitoring solutions for distribution grids
• 11109    Compatibility of Transformer Materials with Insulating Liquids
• 11110    Requirements, design principles and testing experience with composite voltages on a ±550 kV HVDC GIS voltage divider
• 11111    Use of Multiphysics Simulation Tools for Building a Digital Twin of Power Transformers
• 11112    Novel Fiber Optic Sensor Technology for Determining the DP Value of Insulating Paper for Transformers
• 11113    Experimental investigations on electro-thermal ageing of EPDM for HVDC cable joints
• 11114    Investigations on the long-term performance of Fluoronitrile-containing gas mixtures in gas-insulated systems
• 11115    Contribution to the standardisation of measurement of composite and combined high voltages
• 11116    Impact of Different Blocking Elements on the DC-Impulse Composite Waveform
• 11160    The use of Niobium Pentoxide as a High-Performance Material for Applications in Energy Storage
• 11161    A test setup to find the relation between interfacial pressure and tangential breakdown voltage of epoxy/silicone rubber interface
• 11162    The Use of Machine Learning and Artificial Neural Networks to Recognition of Turning Faults in Power Transformers

Tutorial

Tutorial D1.67 - Electric performance of new non-SF6gases and gas mixtures for gas-insulated systems

Opening Panel - Energy Transition Salient Aspects for the Power Industry

• Session 1 - Energy Transition on Power Equipment
• Session 2 - Changes in Planning and Design of Transmission and Distribution Systems
• Session 3 - Re-designing regulatory & market tools considering sector coupling scenarios

General Report D1

Additional informations

Video