Summary
Preferential Subject 1 - Challenges of design and maintenance of IEC 61850 based systems
- B5_101 Design and Development of Model Zone Substation Automation Laboratory for Research, Study & Testing IEC61850 Standard
- B5_102 Quality Assurance of GOOSE/SV Engineering Configuration in the SCL Files
- B5_103 Experiences and Requirements for Commissioning, Troubleshooting and Maintenance of IEC 61850 Stations
- B5_104 Technical requirements for homologation of substation automation systems based on IEC 61850
- B5_105 Time Synchronization and Its Impact on IEC61850 Protocol with Merging Unit and Phasor Measurement Unit Application using the same Network in Real Time Scenario
- B5_106 Brazilian utilities experience in defining requirements for IEC-61850 Protection, Automation and Control Systems
- B5_107 Feeder Differential Protection in Hybrid Mode – Scheme Performance with Mix of IEC 61850-9-2 LE Sampled Values and Conventional Analogue Inputs
- B5_108 Real Formulations and Techniques Addressed to Increase Efficacy in IEC 61.850 Based DSAS Architectures
- B5_109 Experiences with conformance test procedures for IEC 61850 Edition 2 System and IED configuration tools
- B5_110 IEC/IEEE 61850-9-3 Precision Time Protocol – the Enabler for Digital Substation
- B5_111 Research on New Merging Unit for Operation and Maintenance
- B5_112 Key Technologies of Online Maintenance System for Protection Relays in Digital Substation
- B5_113 Research and Application about IEC 61850 Modelling for Protection Relay Information Management System
- B5_114 Devising a cyber-security strategy to guard against emerging attacks on IEC 61850 enabled infrastructures
- B5_115 Design Scheme of Automatic Test System for Merging Unit
- B5_116 Analyze on Digital Sample Reliability and Quality in Smart Substation
- B5_117 How to hack an IEC 61850 system (or protect one)
- B5_118 Implementing IEC61850 PACS in REE: Maintenance processes approach
- B5_119 Towards a BAP including Functional Interoperability Requirements in IEC 61850 based PACS
- B5_120 Virtual Site Acceptance Testing and Training Facility (VSATT) for Digital Substation Solutions
- B5_121 Digital Substation implementation in Litgrid, Lithuania
- B5_122 Design, maintenance, renewal and refurbishment strategies for Substation Automation Systems
- B5_123 Development of a Protection Relay System using a Process bus - Process bus testing in a multi-vendor environment -
- B5_124 SCL handling using Open Source Tools
- B5_125 Lessons Learned from IEC 61850 based Pilot Project Implementation at Kajang Estate (KEST) 132/33 kV Substation: Case Study from Malaysia
- B5_126 The challenges of future proofing IEC61850 based control and protection schemes
Preferential Subject 2 - Protection Issues in Modern Power Systems with Renewable Generation and Storage
- B5_201 Implementation of Fuzzy Logic Inference in the Loss-of-Field on FPGA for Wind Generators
- B5_202 Connecting wind farms to the transmission system. A Protection viewpoint from the Transmission Utility side
- B5_203 Protection Strategy for MMC based DC Distribution Grid under Pole-to-Pole Fault Condition
- B5_204 Impact of Inverter-Based Renewable Generation on Protection
- B5_205 Presentation of the European project MIGRATE
- B5_206 Impact of HVDC-MMC links on distance protection relays
- B5_207 A Distributed Solution for Fault Level Prediction in Distribution Networks
- B5_208 Minimising the Impact of Disturbances in Future Highly-Distributed Power Systems
- B5_209 A New Independent Methodology of Protection & Control Coordination Studies for Modern Power Systems with Power Electronic Applications
- B5_210 Application of Synchronous Compensators in the GB Transmission Network to Address Protection Challenges from Increasing Renewable Generation
- B5_211 Issues and Countermeasures against Rapid Increase of Renewable Energy Sources (RESs) in Japan
- B5_212 A Revised 3-Level Discrete Fourier Transform-Based Frequency Estimation Method to Control a BESS for the System Frequency Regulation
- B5_213 Protection issues under weak infeed of wind turbines
- B5_214 Principles of inverter installations simulation for short circuit currents calculations
- B5_215 Principles of wind power plants simulation for short circuit currents calculations
- B5_216 Interconnection Protection in Distribution Networks with Distributed Generation including Renewable Energy Sources
- B5_217 Particulars of relay protection application in wind and solar power plants interconnections with UPS of Russia
- B5_218 Functional Testing of Protection Systems in Distribution Grids with High Penetration of Distributed Energy Resources
Preferential Subject 3 - The Impact on Protection and Control from Working Existing Assets Harder
- B5_301 Information sufficiency challenges involved in deploying a modern Intelligent Fast Load Shedding System
- B5_302 Real Time Compensation Algorithm for Air-Gapped Current Transformers Saturation Effects
- B5_303 Analysis and Countermeasure for Relay Protection's Influence of UPFC System
- B5_304 Development and Application of Flexible Power Control System for New Energy Station
- B5_305 Influence and Solution for Current Reverse on Differential Protection of Series Compensated Line
- B5_306 Detection of secondary arcs by evaluation of voltage signals during single-phase auto-reclose
- B5_307 Finnish experience on protection of series compensated network
- B5_308 Novel Dynamic Rating System for Enhancing Transformer Operability
- B5_309 Improve the sensitivity and selectivity of the distance relay on the lines with controlled SC
- B5_310 New Smart Multi-Ended Differential Solution for Power Networks.
- B5_311 Transmission Line Status Monitoring for Successful Auto-Reclosing
- B5_312 The architecture of PACS on digital substation with auto recovery of functionality in case of IEDs malfunction.
- B5_313 Real-Time Stability Margin Monitoring System Using Current Data on Current Carrying Capacity of Power Lines
- B5_314 Experiences from Dynamic Line Rating pilot installations in Vattenfall Distribution´s 145 kV system in Sweden
- B5_315 Adaptive Protection of Overloaded Transformers in Distribution Systems in Smart Grids
Additional informations
Publication type | Colloquia |
---|---|
Reference | COLL_AUC_2017 |
Publication year | 2017 |
Publisher | CIGRE National Committee |
Study committees | Protection and automation (B5) |
Price for non member | Free |
Price for member | Free |