SELECT DISTINCT PLACE FROM V_PUB WHERE PLACE IS NOT NULL AND PLACE <> '' ORDER BY PLACE;

Order Publications

Reference: SESSION2016

Type:
Session Materials
Title:

2016 CIGRE SESSION

 

This set records the papers + proceedings discussed at the 2016 Session (Session 46) :

 

 

SC A1 - ROTATING ELECTRICAL MACHINES


PS1 : Developments of Rotating Machines and Experience in Service

  • A1-102 : Fatigue Assessment in the Pole Fixation of Hydro-Generators
  • A1-103 : Adjustable speed pumped storage system contributing in stabilization of power system
  • A1-104 : Upgrade from the fixed speed to adjustable speed (Okutataragi Pumped storage power plant)
  • A1-105 : Ensuring High Quality Insulation System Of Large Motors – Design & Testing Requiring
  • A1-106 : Efficiency and Cost-effectiveness comparison between Synchronous Reluctance Motor and Induction Motor
  • A1-107 : Root Cause Analysis of 450 MVA generator stator core fault
  • A1-108 : Impact of turbogenerator uprating on its transient response in case of grid events
  • A1-109 : Improved Generator Performance with a Nanocomposite High Voltage Insulation System for Stator Windings – A Status Report
  • A1-110 : Flexible Generator-Converter System with Enhanced Grid Support Features - Design and Applications
  • A1-111 : Voith Hydro's experience with the aging of insulation
  • A1-112 : Loss reduction of salient pole synchronous generator damper winding by means of slot skew
  • A1-113 : Optimized design of 4-pole Turbo Generator 2235 MVA platform
  • A1-114 : analytical and Numerical Computation of Wound Fields Synchronous AC Generators
  • A1-115 : Calculation and Analysis of Dynamic Damper Bars Currents and Electromagnetic Force for a Generator-Motor Working as Synchronous Condenser
  • A1-116 : Development of Larger Output Indirectly Hydrogen-cooled Turbine Generator with High
  • Heat Transfer Main Insulation

 

PS2 : Asset Management of Rotating Machines

  • A1-201 : Brazilian Experience with Development and Deployment of an Online PD Monitoring System on Rotating Machines Based on Virtual Instrumentation
  • A1-202 : Progress in Interpreting On-line Partial Discharge Test Results from Motor and
  • Generator Stator Windings
  • A1-203 : Assessment of manufacture quality of stator windings insulation of rotating machines by means of macrographic analysis

 

PS3 : Rotating Machines for Renewable and Dispersed Generation

  • A1-301 : Development of a Methodology for the Design of Axial Flux Microgenerators

 

SC A2 - TRANSFORMERS


PS1 : Advances in transformer diagnostic and monitoring

  • A2-101 : Remote Monitoring System and Analysis of Equipment Performance for Asset Management
  • A2-102 : Determinants of Transformer Life and Sophistication of Deterioration Diagnosis Corresponding to Aging
  • A2-103 : Smart Monitoring of Power Transformers: Project Update
  • A2-104 : New Online Vibro-Acoustic Tap-Changer Diagnostic Method – First Results and Practical Experience
  • A2-105 : Denoising of UHF Signals based on RBPF and the Localization of PD Sources using FDTD Method in Power Transformer
  • A2-106 : Advanced Dissolved Gas Analysis(DGA) Diagnostic Methods with Estimation of Faultocation for Power Transformer Based on Field Database
  • A2-107 : Condition Assessment of Power Transformers in service using PD Monitoring
  • A2-108 : Diagnosing difficult transformer problems using online condition monitoring
  • A2-109 : Condition monitoring and diagnostic assessment of transformers
  • A2-110 : Transformer Health Index and Probability of Failure Based on Failure Mode Effects Analysis (FMEA) of a Reliability Centered Maintenance (RCM) Program
  • A2-111 : Parameters influencing Partial Discharge Measurements and their Impact on Diagnosis, Monitoring and Acceptance Tests of Power Transformers
  • A2-112 : Assessment of Methanol as cellulose aging marker in mineral and ester oils
  • A2-113 : Expert System of Monitoring, Diagnostics and Control for Transformers (ESMDU_TRANS)
  • A2-114 : Improvements of Large Power Transformer Condition Real Time Monitoring and Diagnosis Expert System – a Romanian Experience
  • A2-115 : Interpretation of Results of Diagnostics of Power Transformers by Using the Frequency Response Analysis
  • A2-116 : Dynamic Behaviour of Fault Gases and Online Gas Sensors

 

PS2 : EHV / UHV and EHV DC / UHV DC Transformers and their components

  • A2-201 : Evaluation Method of VFT Stresses for Power Transformer Winding Design - Interaction Experience Between Manufacturer and Utility
  • A2-202 : Establishing Power Transformers Capability while under Geomagnetic Disturbances
  • A2-203 : 3 Phase 420 kV Shunt Reactor manufacturing and quality sensitivity for vibration control – A case study
  • A2-205 : The proposal of permissible vibration level for power transformer and its accessories
  • A2-206 : Short Circuit Design Conception and Validation of a 570 MVA, single-phase GSUTransformer by SC-Withstand Tests on a Mock-up Unit
  • A2-207 : Advanced designs of variable shunt reactors with on-load tap-changers for wider regulation range
  • A2-208 : Large Power Transformers using Alternative Liquids - Experience in the range of 420 kV transmission level
  • A2-209 : No-load long duration test experience to test the thermal performance of the transformer magnetic core
  • A2-210 : Research and Application of UHV AC Transformers and Shunt Reactors
  • A2-211 : Fast Response Thyristor Controlled Shunt Reactor. Development and Application Experience

 

PS3 : Transformer windings

  • A2-301 : Accelerated Transformer Aging using Upgraded Kraft and Natural Ester Insulation System
  • A2-302 : Post-Failure Evaluation of Dielectric Performance of Winding of 38-y.o. Transformer Enhanced by On-Line Moisture Monitoring
  • A2-303 : On-site replacement of OLTC, drying of winding insulation, induced voltage test with PD measurement of 250 MVA, 400/110 kV, 40 years old transformer
  • A2-304 : Experiences and innovations in transformer short-circuit current withstand testing
  • A2-305 : Design of 154kV power transformer using natural ester oil
  • A2-306 : A Study on Inflammable Gas Generation according to Small Gap Discharge within Floating Electrodes by Induced Voltage in Power Transformer
  • A2-307 : Dry-type subtransmission transformer: dry power transformers for the 123 kV and 145 kV voltage class
  • A2-308 : Short-circuit testing of 66 kV / 34 MVA dry-type power transformer
  • A2-309 : Evaluation of the Thermal Performance of Transformer Windings by Numerical Investigations and Measurements
  • A2-310 : Novel Thermal-Hydraulic Network Model for Shell-Type Windings. Comparison with CFD and Experiments
  • A2-311 : Influence of the Lightning Impulse Shape on the Electrical Stresses on Windings Insulation of Power Transformers and Shunt Reactors

 

SC A3 - HIGH VOLTAGE EQUIPMENT

 

PS1 : High voltage equipment for emerging power system conditions

  • A3-101 : Overview of Non-intrusive Condition Assessment of T&D Switchgear
  • A3-102 : Reduction of the TRV for Terminal Circuit Breakers on Series Compensated Lines
  • A3-103 : Survey on Requirements for Bus-transfer Current Switching
  • A3-104 : Voltage and Current Measurements for Smart Applications in Substations at Hydro-Québec
  • A3-105 : Development of high voltage vacuum interrupter with earthed metal enclosure for the transmission line
  • A3-106 : Development of HVDC Circuit Breaker with Fast Interruption Speed
  • A3-107 : Switching transients with simple transformer-line/cable configurations
  • A3-108 : New test-methods for circuit breakers of 800kV and above
  • A3-109 : Test-circuits and testing of HVDC circuits breakers
  • A3-110 : Very fast transient over voltages on paper oil insulated inductive voltage transformers
  • A3-111 : Inductive voltage transformers for auxiliary services power supply in substations. Design, specification and normative aspects and application example
  • A3-112 : Arresters with advanced cooling performance for protection of valves in HVDC converters
  • A3-113 : Environmentally Friendly Perfluoroketones-based Mixture as Switching Medium in High Voltage Circuit Breakers
  • ? A3-114 : DETAILED ANALYSIS OF LIVETANKS, DEAD TANKS AND GAS CIRCUIT-BREAKERS USING A NEW ENVIRONMENTAL FRIENDLY GAS
  • A3-115 : METHODOLOGIES FOR POLLUTION TESTS ON COMPOSITE HOUSINGS
  • A3-116 : Transient behaviour of conventional and innovative capacitive voltage transformers: simulations and HV laboratory testing
  • A3-117 : Research and Development of a Full-bridge Cascaded Hybrid HVDC Breaker for VSCHVDC Applications
  • A3-118 : The Establishment of Standard System for Accuracy Measurement of Harmonics of Electronic Voltage Transformers
  • A3-119 : In-adequate Damping Leading to Ferroresonance on Voltage Transformers: A Case Study

 

PS2 : Lifetime management of transmission & distribution equipment

  • A3-201 : Challenges for managing overstresses and end of life of HV equipment
  • A3-202 : Investigation on Contamination Deposit Performance and Pollution Withstand Voltage Characteristics of Polymer Devices
  • A3-203 : Transformation in Lifetime Asset Management of EHV Circuit Breakers – A Case Study
  • A3-204 : Contactless thermal online-monitoring of electrical equipment under load to determine the load level and damage avoidance
  • A3-205 : D-Watch – intelligent disconnector mechanism for digital substation

 

PS3 : Applica tion of information technology tools for development & management of high voltage equipment

  • A3-301 : Coupled Fluid-Mechanical Analysis Method in High-Voltage Circuit Breakers Design
  • A3-302 : CFD ANALYSIS AND NUMERICAL STUDY OF THE HOT GAS FLOW INSIDE THE HIGH VOLTAGE GAS CIRCUIT BREAKERS
  • A3-303 : Reduced scale feasibility of temperature rise tests in substation connectors
  • A3-304 : Power quality enhancement through optimum combination of controlled switching and low scatter CB drives
  • A3-305 : Mathematical and physical models development for study the high-voltage resistive dividers of digital voltage transformers

 

SC B1 - INSULATED CABLES 

 

PS1 : Feedback from newly installed or up graded cable systems

  • B1-101 : Implementation Measures: An Overhead Transmission Line moves to Underground Transmission Line
  • B1-102 : Adoption of premolded joint and specialized cable installing method for the 275 kV XLPE cable underground transmission line in a tunnel
  • B1-103 : 220kV North Auckland and Northland (NAaN) Project in Auckland, New Zealand
  • B1-104 : Monitoring and up-gradation of Underground Cable Network by various methods
  • B1-105 : Mutual Inductive Interference of 400 kV Cable Systems
  • B1-106 : BC Hydro Experience to mitigate a hot spot along a 230kV XLPE cable circuit using a novel cooling solution
  • B1-107 : Development of AC 400kV XLPE Submarine Power Cable System
  • B1-108 : Location of sheath voltage limiters (SVLs) used for accessory protection to assure the insulation coordination of cable outer sheath, sectionalising joints and terminations of high voltage cable systems
  • B1-109 : Cable system qualification process for the Italy - France HVDC intertie

 

PS2 : Best use of existing cable systems

  • B1-201 : Maintenance Strategies Developed for the Underground Transmission Systems of ISA - Interconexión Eléctrica
  • B1-202 : Utility Experience with Field Condition Assessment of High Voltage Underground Cable Systems
  • B1-203 : Field Testing of high Voltage Cable: The Experience with AC Test on 115 kV Cables in MEA Thailand
  • B1-205 : Learning from on-line monitoring of medium voltage power cables – with PD and fault location
  • B1-206 : Measurements and FEA results of steel armour losses in three-core submarine XLPE cables
  • B1-207 : Improvement of Dissolved Gas Analysis Technique for Oil-Filled Cable Facilities and Practical Application of Gas Analysis Technique to XLPE Cable Facilities
  • B1-208 : Development of a Robot for Maintenance Work in the Spanish-French Electrical Interconnection Tunnel
  • B1-209 : Sheath currents monitoring in high voltage isolated cables
  • B1-210 : Transmission capacity management of subsea cables for the grid connection of offshore wind farms
  • B1-211 : Maintenance strategies for MV/HV subsea cable networks
  • B1-212 : Life Cycle Assessment (LCA) of a 380 kV double circuit HVAC cable transmission line
  • B1-213 : Belgian experience with real time temperature system in combination with distributed temperature sensing techniques
  • B1-214 : Fire Safety of Cables in Power Grid: Tracking Combustion Test Standards of Cables and New Insights on Test Framework
  • B1-215 : Submarine Cable Location. New technology – development and testing
  • B1-216 : Current Rating and Risk of Cavity-Induced Breakdown in Mass Impregnated Non-Draining HVDC Subsea Cables
  • B1-217 : Application of Partial Discharge Diagnostic technique on High Voltage Cable sealing ends to predict catastrophic failures with supportive case study

 

PS3 : Insulated cables in the Power System of the Future

  • B1-301 : A new voltage level for extruded DC cables
  • B1-302 : Development of the Riser Cable System for Offshore Floating Wind Power Project
  • B1-303 : Systematic Description of Dynamic Load for Cables for Offshore Wind Farms. Method and Experience
  • B1-304 : Understanding losses in three core armoured submarine cables
  • B1-305 : NEW TRANSITION JOINT
  • B1-306 : Use of aluminium for Cable Conductors and sheaths in EHV power cable systems
  • B1-307 : EFFECT OF ULTRAVIOLET RADIATIONS AND SANDSTORMS ON THE FLASHOVER VOLTAGE OF SILICONE RUBBER CABLE TERMINATIONS
  • B1-308 : Simplified Undergrounding of 400 kV Overhead Lines with Superconducting Cable Systems
  • B1-309 : After Laying Tests on Long HVAC and HVDC Extruded insulated Cable Systems
  • B1-310 : 400kV – 2 x 1000MW Submarine Cable Crossing of the Dardanelles Strait
  • B1-311 : Optimization of Submarine Cable Structure Based on Ampacity
  • B1-312 : The world longest and deepest 430 kV XLPE submarine cable
  • B1-313 : Thermal characterization of seabed along the NordLink cable route – results and comparison of measurements methods
  • B1-314 : Effect of Water Pipeline on Ampacity of Underground Cables: Case Study

 

SC B2 - OVERHEAD LINES

 

PS1 : Overhead Lines for high power transfer capacity

  • B2-101 : HVDC ±800 kV Transmission Line Associated to the Belo Monte Hydroelectric Power Plant - Studies and Definitions for the Basic Design - Innovation and Challenges for a New Level of Voltage in Brazil
  • B2-102 : Increasing the transfer capacity of overhead lines on the connection of wind power plants, through correlation between climatic data and temperature of conductors at higher currents
  • B2-103 : Prospective DC Conversion of a Major 345 kV AC Line
  • B2-104 : Assessment of HTLS Conductors to Increase the Power Transfer in the Mexican Electric Transmission System
  • B2-105 : Operational aspects of dynamic line rating. Application to a real case of grid integration of wind farms
  • B2-106 : Compact lines with pivoted insulated cross-arms. General stability design criteria
  • B2-107 : A 500 kV HVAC circuit reconversion into a +/-500 kV HVDC bipole line in the Central Interconnected System (Chile)
  • B2-108 : Verification of thermal rating calculations for high temperature low sag (HTLS) conductors
  • B2-109 : Assessment on the ignition of electric arc and flashover distances between overhead transmission lines and the surrounding vegetation
  • B2-110 : Monopole 220 kV tubular tower of steel tubes and cast steel without visible connections.
  • B2-111 : Operation Experience of 1000 kV Ultra High Voltage AC Transmission Technology
  • B2-112 : Design Verification by Analysis of Transmission Lines Exposed to Large Topographic Variations, Temperature Changes and Extreme Ice Loads
  • B2-113 : Design and engineering of a new 525 kV HVDC line in Norway
  • B2-114 : Monitoring and forecasting ice loads on a 420 kV transmission line in extreme climatic conditions
  • B2-115 : Compact controllable 110 – 500 kV overhead lines

 

PS2 : Project management, construction and maintenance

  • B2-201 : Calculation Accuracy of High-Temperature Sag for ACSR in Existing Lines
  • B2-202 : The Development of Electric Wires of High Tensile Strength and Corrosion Resistance, and Their Application to Renewal of 500 kV Long Span Transmission Lines Crossing the Strait
  • B2-203 : Innovation in Evaluating and Managing the Reliability of Aged Transmission Structures
  • B2-204 : Execution Of Transmission Projects With Innovative Methods For Augmentation Of EHV Network In Mega City Of Mumbai – Challenges & Solutions
  • B2-205 : A New Model for Developing, Constructing, Financing and Operating Major Transmission Projects in Alberta
  • B2-206 : A portable digital X-Ray system for the in-situ detection of ACSR broken strands at suspension clamps: field results and introduction onto Line Scout Robotic Technology
  • B2-207 : The new tower lifting method for the 345kV transmission lines
  • B2-208 : Research into an increased number of unexplained line outages of polymeric insulator sets used within the Czech transmission grid
  • B2-209 : Improved Efficencies in Conductor Stringing
  • B2-210 : A novel HTLS thermo-mechanical model: applications to Italian OHTL.
  • B2-211 : Real Time Measurements for Online Monitoring and Intelligent Management of High Voltage Transmission Lines
  • B2-212 : Condition Assessment of Overhead Line Convertors by the Pulse Current Method

 

PS3 : Application of new materials and technologies

  • B2-301 : Innovation-Section: test-run for uprating 220 kV to 380 kV using insulated cross arms and coated conductors
  • B2-302 : Testing Steel Lattice Towers with a Hybrid (Numerical / Experimental) Method
  • B2-303 : Development of Estimating Method for Conductor corrosion and High corrosion resistant Conductor for overhead transmission lines
  • B2-304 : Appropriateness of concrete poles for 400 kV Wintrack II
  • B2-305 : Temperature Profile along an Overhead Line Conductor in and near the Tension Clamp
  • B2-306 : Comparative Investigations of Hydrophobicity Effects and Erosion Resistance of Silicone Rubber used for Housings of AC and DC Insulators
  • B2-307 : CompactLine – a new Overhead Transmission Line Concept
  • B2-308 : A new design of high voltage overhead line using composite poles
  • B2-309 : Design, testing and installation of innovative 380 kV Dutton–Rosental towers
  • B2-310 : Development of 1250mm2 Large Cross-Section Conductors for UHV DC Transmission Lines
  • B2-311 : Proposals for additions to IEC requirements intended to verify quality of glass cap and pin insulators
  • B2-313 : Corona noise comparison of the standard and surface treated conductors obtained with monitoring of the newly erected 400 kV line and with corona testing in high-voltage laboratory

 

SC B3 - SUBSTATIONS

 

PS1 : Advances in substation technology

  • B3-101 : Non-Conventional Instrument Transformers for Improved Substation Design
  • B3-102 : Ceramic and Hybrid Support Insulators for UHVDC Systems
  • B3-103 : Substation Automation from Conventional to full Digital Technologies – Case Studies and Impact
  • B3-104 : High Power Underground Transmission for HV DC
  • B3-105 : 170 kV pilot installation with a ketone based insulation gas with first experience from operation in the grid
  • B3-106 : Application of a fluoronitrile gas in GIS and GIL as an environmental friendly alternative to SF6
  • B3-107 : Dielectric testing of GIS RC-dividers for HVDC GIS/GIL substations with increased dielectric requirements
  • B3-108 : Advanced insulation and switching concepts for next generation High Voltage Substations
  • B3-109 : Basic features of the new 145 kV metal-enclosed, SF6 gas-insulated switchgear
  • B3-110 : 2nd generation DC grid access for offshore wind farms: "HVDC in an AC fashion"
  • B3-111 : Customer process for technical qualification of NCIT-products for high-voltage GIS applications
  • B3-112 : ABB PASS M0S 420kV for transmission substation
  • B3-114 : An Autonomous Intelligent Robot for Electronic Equipment Inspection Used in Substation
  • B3-115 : High Frequency Current in the Power System and Its Influence on Transfer Accuracy of Electronic Current Transformer

 

PS2 : Developments and new thinking in substation design

  • B3-201 : Applying mixed technology switchgear (MTS) for adaptation of substations to meet new Brazilian power system requirements of availability
  • B3-202 : Brown Field Implementation of an IEC 61850 Based Integrated Protection and Automation System
  • B3-203 : Integrating In-house IEC61850 Technology into Existing Substation:A Case of EGAT Substation Control System
  • B3-204 : Countermeasures in a substations for large renewable energy adoption
  • B3-205 : Integrating IEC61850 into Existing Substations in MEA's Distribution System
  • B3-206 : Retrofitting and Modernization of Conventional Substation to An IEC 61850 Based Automated Substation – A Case Study of 400KV Amreli Substation
  • B3-207 : 50kV switchgear lost? Up & running in 30 hours solution!
  • B3-208 : Bus-Node - A Novel Substation Concept
  • B3-209 : Implementation of Building Information Modelling (BIM) process in substation design software to increase design quality
  • B3-210 : Mitigation of the Impact of Increasing Short Circuit Levels on Aging Transmission Substation Structures in Ireland
  • B3-211 : Integration of an IEC 61850 process bus in an existing substation
  • B3-213 : Development of common technical requirements for monitoring and diagnostic systems to improve availability of substations
  • B3-214 : Completing the IEC 61850 substation – the need for metering

 

PS3 : Evolution in Substation Management

  • B3-301 : RF Sensors Development and Condition Metric Development for Contaminated Substation Insulation
  • B3-302 : Current situation and Recent Challenges in Asset Management of Aging T&D Substation Facilities in Japan
  • B3-303 : Development of a Substation Fire Management Strategy and the implementation of a Hypoxic Fire Prevention System
  • B3-304 : Operational Experience In 1200kV (UHVAC) National Test Station, India
  • B3-305 : Partial Discharge Diagnosis Method using Non-phase Synchronized UHF PD Pattern based on On-site Measurement Database for Substation
  • B3-307 : Evaluation of the High Voltage Gas Insulated Substations (GIS) Based on Flashovers in the 220 kV Switchgears
  • B3-308 : Removing risk of eventual discharges between GIS grounding parts and cable sheath connected to the substation earth through a separate grounding lead
  • B3-309 : Impact of Renewable Grid Code compliance on Substation design
  • B3-310 : Enablers for Cost Saving in Air Insulated Substation Asset Management
  • B3-311 : Life extension program for GIS Circuit breaker retrofitting Le Havre Project
  • B3-312 : Using indicators to screen and monitor substation vulnerability affecting security of supply

 

SC B4 - HVDC AND POWER ELECTRONIC SYSTEMS

 

PS1 : HVDC systems and their applications

  • B4-101 : A second and longer ± 800 kV DC bipole completes Belo Monte's integration
  • B4-102 : Semi-fullbridge Modular Multilevel Converter: An Inherent DC Fault Current Limiting Topology
  • B4-103 : Smooth coordination and management of impact of EstLink 2 transmission testing on electricity markets, power system operations and system technical performance
  • B4-104 : Celilo HVdc Terminal Upgrade Project – Pacific NW-SW HVdc Intertie System
  • B4-105 : Protective Firing in LCC HVDC: Purposes and Present principles. Settings and behavior
  • B4-106 : HVDC POWER FROM SHORE
  • B4-107 : 50 years of Operating Experience of Sakuma Frequency Converter Station - Changing Roles in the Japanese Power System's Transition
  • B4-108 : Zambezi (previously Caprivi) Link HVDC Interconnector: Review of Operational Performance in the First Five Years
  • B4-109 : Commissioning Experience and Challenges of World's First 800 kV, 6000 MW NER – Agra Multi terminal HVDC System
  • B4-110 : AC-DC Interaction Study For Upcoming ± 800 kV, 3000 MW Champa Kurukshetra HVDC Link
  • B4-111 : Converter Transformer Inrush Control Using Hybrid Pre-insertion Resistors and Pointon- Wave Switching in the New Zealand HVDC System
  • B4-112 : Using Classic LCC HVdc to Transmit Renewable Energy from Weak AC Systems
  • B4-113 : HVDC Overhead Line Design Considering LCC vs. VSC Technology
  • B4-114 : Nelson River Pole 1 Thyristor Leakage Assessment & Online Monitoring
  • B4-115 : Enabling DC Fault Blocking Capability of Hybrid Modular Multilevel Converter HVDC using Asymmetrical Full-bridge Submodule
  • B4-116 : Test Circuit for Voltage Sourced Converter Valve in MMC-Based HVDC
  • B4-117 : Operational experience of new Spain-France HVDC interconnection
  • B4-118 : A closer look at protection concepts for DC systems
  • B4-119 : Improving the DC fault response of H-bridge MMC-based HVDC Networks
  • B4-120 : Automated Operation of Parallel VSC HVDC Links Embedded in an AC Power System
  • B4-121 : Diode-Rectifier HVDC link to onshore power systems: Dynamic performance of wind turbine generators and Reliability of liquid immersed HVDC Diode Rectifier Units
  • B4-122 : EMTP simulation verification of full bridge MMC HVDC operational advantages
  • B4-123 : Feedback on IFA 2000 France-England Refurbishment Project
  • B4-124 : Feedback on INELFE France Spain HVDC Project
  • B4-125 : Commutation failures mitigation in multi-infeed network with high renewable penetration: TERNA's experience
  • B4-126 : Communication-free control solution for the provision of frequency regulation services in HVDC grids: Numerical simulation and experimental validation in a reduced scale platforms
  • B4-127 : Study of Backbone Structure Change from Synchronous to Asynchronous in China Southern Power Grid
  • B4-128 : Interaction btween parallel HVDC an AC overhead lines
  • B4-129 : Experience from a bipolar HVDC system with a Voltage Source Converter and a Line Commutating Converter
  • B4-130 : Saudi Arabia Central-West HVDC Project: 3500 MW ±600 kV LCC 800 km High Performance embedded link crossing a desert area
  • B4-131 : SURVEY OF THE RELIABILITY OF HVDC SYSTEMS THROUGHOUT THE WORLD DURING 2013 – 2014
  • B4-132 : Design consideration associated with DolWin3 and evolution of GE's Grid Solutions Business VSC Solution

 

PS2 : FACTS and other Power Electronic (PE) systems for transmission

  • B4-201 : Brazilian Experience Regarding Interactions between Series Capacitors and SVCs - Main challenges of the Tucurui-Macapa-Manaus Interconnection Project
  • B4-202 : Blocking reactor as part of SVC system - a novel concept for harmonics reduction and lowered operational losses
  • B4-203 : Comparison of Switching Schemes for STATCOMs using Modular Multi-Level Converters
  • B4-204 : Acoustic aspects for Air Core Dry Type Reactors - Specification, Design, Testing, Field Measurements
  • B4-205 : Essex STATCOM Life Assessment and Extension
  • B4-206 : Planning and commissioning of 130MVA GCT-STATCOM for transient stability improvement
  • B4-207 : IGBT Explosion Test for STATCOM Sub-module
  • B4-208 : Harmonic Performance Requirements and Mitigation for back-to-back HVDC in Turkish Transmission System
  • B4-209 : Magnetically controlled shunt reactor use in 110-500 kV power grids
  • B4-210 : Electrical Test of STATCOM Valves

 

PS3 : DC and other Power Electronic (PE) systems for distribution

  • B4-301 : Studies for Characterisation of Electrical Properties of DC Collection System in Offshore Wind Farms
  • B4-302 : Evaluation of the potential market for MVDC technology in Scotland
  • B4-303 : Integrating Smart Solid State Transformers Into Distribution Substations

 

SC B5 - PROTECTION AND AUTOMATION

 

PS1 : Protection Automation and Control System (PACS) Optimization and Life Time Asset Management

  • B5-101 : Recording and Documentation Criteria Proposed for the Complete Life Cycle of Digital Substation Automation Systems in Brazil - Findings and Trends
  • B5-102 : Comparison of Risk Assessment Approaches in Wide Area Protection Coordination
  • B5-103 : Innovative Wide-area and Local Voltage Control of Dynamic Shunt Compensation Devices to Prevent Voltage Collapse
  • B5-104 : Concept and Method of Replacement of Protection Relay and Control Equipment
  • B5-105 : Evaluation of Compensating Saturation Algorithms for Protective Current Transformers
  • B5-106 : Towards the plug&play challenge, pursuing the goal of streamline Distribution Grid Management and Maintenance
  • B5-107 : Functional Integration and IEC 61850 to optimise substation automation system design
  • B5-108 : Automatic configuration management for PACS
  • B5-109 : Optimization techniques reducing periodic maintenance and retrofit outage times with digital substation technology
  • B5-110 : The role of protection performance audits in the lifetime management of protection systems
  • B5-111 : System Redundancy in Power Substation Retrofits
  • B5-112 : Lifecycle management of existing PACS including maintenance and design at Rte
  • B5-113 : Automatic system for gathering data from IEDs - implementation specifics in Ukrainian power engineering
  • B5-114 : Improving the Fault Location for Romanian Power Transmission Lines using the Existing Measurements
  • B5-115 : Towards optimized digital substation automation systems
  • B5-116 : Protection, Automation and Control (PAC) LifeTime Management for Transmission and Distribution utilities: Commonalities and Contrasts
  • B5-117 : The Identification of Transmission Line Overload and Faults Based on Voltage Plane
  • B5-118 : Reliability Improvements on IEC 61850 Process Bus Application
  • B5-120 : Quantitative Reliability Assessment of Alternative Busbar Protection Schemes
  • B5-121 : Using of Optimization techniques for development of functionally integrated systems of relay protection and automation
  • B5-122 : PMU Based Real Time Vulnerability Assessment of Zone 3 Distance Relay to Prevent Cascading Outages

 

PS2 : Coordination of Generator and power system Protection

  • B5-201 : A Universal Relay Protection Coordination Model for Synchronous Machine Based on Transient Stability
  • B5-202 : Coordination of Power Plant Backup Protection and Transmission System Protection in Thailand
  • B5-203 : Coordination of Generator and Power System Protection in Korea
  • B5-204 : System Protection against Voltage Instability and Impact of Generator Protection
  • B5-205 : Operating experience with the coordinated requirements for power plant and power system protection
  • B5-206 : Probabilistic Analysis of Fault currents in Unbalanced Distribution Systems in the Presence of Stochastically Dependent Renewable Energy Re-sources.
  • B5-207 : Protection and Operation Requirements to Enhance Grid Stability with Large Scale Wind Integration in Egypt
  • B5-208 : Performance of generator protection during power system failures – selected protection functions and new experiences with unsymmetrical faults
  • B5-209 : The Performance Analysis of Protection Schemes in Transmission System with Series Compensated Transmission Lines using a Real Time Digital Simulator (RTDS)
  • B5-210 : Offshore context and protection issues
  • B5-211 : Coordinating Generating Units and Power System Protections
  • B5-212 : HV Open Phase Detection Method Based on Symmetrical Components
  • B5-213 : Requirements for relay protection and automation applications of electric power stations, providing stability of their operation in electric power system
  • B5-214 : High-speed Generator-transformer Unit Backup Protection Scheme

 

SC C1 - SYSTEM DEVELOPMENT AND ECONOMICS

 

PS1 : State of the art approaches and standardization in asset management decision making

  • C1-101 : Transitioning of Distribution Asset Management to a Prescriptive Approach
  • C1-102 : Analysis of SCADA data for early fault detection in Wind turbines
  • C1-103 : Development and application of an asset criticality framework to prioritise asset expenditure
  • C1-104 : Changing interaction between asset renewal and planning in Australia and New Zealand
  • C1-105 : Transmission Asset Management Through in-House Developed Software for Transmission System of Gujarat State
  • C1-106 : Hazard Rate Model for Risk-based Asset Investment Decision Making

 

PS2 : Interfac e and allocation issues in planning T&D networks with multi-party projects

  • C1-201 : INVESTMENT ANALYSIS IN TRANSMISSION AND DISTRIBUTION PROJECTS - CALCULATION OF MANAGEMENT FLEXIBILITIES
  • C1-202 : Assessment of Island Interconnection Projects via HVDC Links of Partial Capacity: The Case of Crete
  • C1-203 : Transmission Network Planning and Delivery: comparing the German and Chilean Experiences
  • C1-204 : Managing Regional Security of Supply: A Case Study from Scotland
  • C1-205 : Djibouti Transmission Master Plan at 2033 horizon
  • C1-206 : Research on Power Grid Planning Data Model and Data Stream of State Grid Corporation
  • C1-207 : Challenges in Realising the Potential of the GCC Interconnector

 

PS3 : New system solutions and planning techniques for flexible and robust system plans

  • C1-301 : Energizing Green Cities in Southeast Asia: Application of Sustainable Urban Energy and Emissions Planning in Vietnam
  • C1-302 : Integration of Series FACTS into Interconnect-scale Production Cost and Long-term Planning Tools
  • C1-303 : Innovative approach to obtaining authorisation for new power corridors in South Africa
  • C1-304 : Change in selection philosophy of shunt line reactor allows Eskom to realize perpetual economic benefits
  • C1-305 : Overcoming barriers to the use of alternative and innovative solutions such as standalone power systems as an alternative to replacement of end-of-life network assets
  • C1-306 : Transmission System Planning under uncertainties including renewable penetration regime in Indian Context
  • C1-307 : Probabilistic Power Flow as an element of planning methodology
  • C1-308 : Assessment of the Impact on Hybrid AC/DC Power System Following a Change of the Bulk Power System
  • C1-309 : Offshore wind farm stochastic economic evaluation
  • C1-310 : Optimization of RES Generation in the European System
  • C1-311 : Technical and Economical Evaluation of the Use of Energy Storage to Provide Frequency Regulation Services in the Chilean Interconnected Systems
  • C1-312 : Complex Modernization of Russian Distribution Network of Bashkirenergo based on advanced Smart Grid Technologies
  • C1-314 : Côte d'Ivoire Generation and Transmission Master Plan at 2030 horizon
  • C1-315 : e-Highway2050: a research project analysing very long term investment needs for the pan-European transmission system
  • C1-316 : French Zonal Model for Development Studies
  • C1-317 : An innovative cost-benefit analysis to assess transmission projects: the Italian case
  • C1-318 : Application of innovative grid-impacting technologies in pan-European and regional case studies towards the EU Energy Union: the GridTech analyses
  • C1-319 : A practical implementation of representative planning case selection for grid studies, as used in TYNDP studies for ENTSO-E
  • C1-320 : Research on the Efficient and Secure Transmission of Wind, PV and Thermal Power from Large-scale Energy Resource Bases through UHVDC Projects
  • C1-321 : Comparison between Deterministic and Probabilistic Methods for Evaluating Grid-Accommodative Wind Power Capacity
  • C1-322 : Systematic Approach for Dynamic Equivalents Development of Large-Scale Power System Using PSS/E
  • C1-323 : Planning and Design Considerations Associated with the Integration of the UAE's First Nuclear Power Plant
  • C1-324 : Improvement of mode controllability and short-circuit currents limitation in metropolises power grid by means of electromechanical AC links as an alternative to DC links

 

SC C2 - SYSTEM OPERATION AND CONTROL

 

PS1 : Grid operation solutions to changes in generation mix including distributed and renewable generating resources

  • C2-101 : Using a Static and Dynamic Security Assessment Tool to Evaluate the Effects of Increasing Wind Power Penetration in Future Operating Conditions of the Brazilian Interconnected Power System
  • C2-102 : Improvement of Technical Requirements for Connecting Wind Plants in the Brazilian Interconnected Power System
  • C2-103 : High Fidelity Modeling Approach to Analysing Combined-Cycle Power Plant Response to Proposed ROCOF Requirements in Ireland
  • C2-104 : Tuning primary frequency controllers using robust control theory in a power system dominated by hydropower
  • C2-105 : Full Scale Frequency Response Tests in the Nordic Synchronized Area
  • C2-106 : Integration of PV Contribution into the Load Forecast and Dispatch
  • C2-107 : Selective Generation Shift Key determination - an enhanced method for the flow-based market coupling capacity calculation
  • C2-108 : Secondary Frequency Control and Balancing Operation Using Coordination Control of Conventional Sources and Battery Energy Storage System with Large-scale Renewable Energy Integratio
  • C2-109 : Storage application for frequency control of hourly cross-border program changes
  • C2-110 : Innovative tools for the future coordinated and stable operation of the pan-European electricity transmission system
  • C2-111 : Increased cooperation between TSO and DSOs as precondition for further developments in ancillary services due to increased distributed (renewable) generation
  • C2-112 : Primary control reserves provision with battery energy storage systems in the largest European ancillary services cooperation
  • C2-113 : Real time synchronous generator dynamic reactive reserve monitoring by coordinated reactive power voltage controller
  • C2-114 : Anticipating Power System Needs in Response to the Global Energy Transition
  • C2-115 : Emulated Inertial Response from Wind Power: Ancillary Service Design and System Scheduling Considerations
  • C2-116 : Operational Security Challenges and Tools for a Synchronous Power System with High Penetration of Non-conventional Sources
  • C2-117 : Smart dispatch of variable-speed Pump Storage Plants to facilitate the insertion of intermittent generation
  • C2-118 : Innovative solutions for real-time Dynamic Security Assessment and automatic system devoted to special protection schemes of Italian Defense plan
  • C2-119 : Power Systems Oscillations Damping with Regard the Finite Speed of Propagation the Electromechanical Waves
  • C2-120 : Integration of 2 days-ahead capacity forecast for managing Belgian energy imports
  • C2-121 : Monitoring, operation and control solutions in the process of renewable energy source integration Transelectrica's experience
  • C2-122 : Probabilistic dimensioning of tertiary control reserve driven by the intermittency of renewable generation in Portugal
  • C2-123 : Stability Control Strategy and Operation of Large-Scale UHVAC/DC Hybrid Power System
  • C2-124 : New Ancillary Service to Mitigate Determistic Frequency Deviations
  • C2-125 : Automatic device of monitoring of stability margins

 

PS2 : Managing system disturbances and system restoration

  • C2-201 : Ensuring the black start capability of the South African Power system
  • C2-202 : Geomagnetic Disturbances Monitoring, Modelling and Mitigation
  • C2-203 : EXPERIENCES WITH GENERATOR FAILURE AND EFFECT ON NETWORK AND LOAD RESPONSE
  • C2-204 : Wide-area control of SVCs in Australian power system
  • C2-205 : POORLY DAMPED ELECTROMECHANICAL OSCILLATION IN THE 345 kV INTERCONNECTION BETWEEN ARGENTINA AND CHILE. IDENTIFICATION BASED ON A SLIDING PRONY ANALYSIS.
  • C2-206 : Control of wind farm and VSC-HVDC to enhance frequency reserve
  • C2-207 : Methodology for next generation system operation between DSO and DSO
  • C2-208 : Advances in Wide Area Monitoring and Control to address Emerging Requirements related to Inertia, Stability and Power Transfer in the GB Power System
  • C2-209 : Disturbance Management in the Turkish Power System interconnected with the ENTSOE System. Defence Strategies and Operation Experience
  • C2-210 : Norwegian disturbance management system and database
  • C2-211 : Power system operation efficiency increasing considering transfer capacity parameters affection
  • C2-212 : Operator Training for Restoration of Power Systems with High Shares of Volatile Generation
  • C2-213 : An Assessment of a Cost-effective Demand Response Scenario A case study for Jordan

 

SC C3 - SYSTEM ENVIRONMENTAL PERFORMANCE

 

PS1 : Environmental liabilities of transmission and distribution assets

  • C3-101 : Analysis of the Impact of Geomagnetic Disturbances on the Austrian Transmission Grid
  • C3-102 : Electrocution risks to endangered birds on MV overhead lines – South African experiences
  • C3-103 : The authorization procedure for Energy Storage Systems Projects installed on the Italian Transmission Grid
  • C3-104 : Liability for contaminated sites initiated by the unbundling of the transmission grid in Belgium

 

PS2 : Overhead lines and underground cables: acceptability issues

  • C3-201 : Evaluation method for values derived from substation instalment
  • C3-202 : Ausgrid's North Shore 132kV Cables Project - Learnings on Route Selection, EMF Mitigation and Stakeholder Engagement
  • C3-203 : HV Underground Cables Magnetic Field Mitigation Measures
  • C3-204 : 3D multi-viewpoints environment to analyze the visual impact of overhead lines
  • C3-205 : Analysis of Induced Electromotive Force in Phase Conductors of 35 kV Line Caused by Phase-to-Ground Fault in 400 kV Overhead Power Line
  • C3-207 : On the use of the HMCPL shielding system in renewing the underground HV power lines in big cities
  • C3-209 : Life cycle assessment of the UGC transmission system in Iceland
  • C3-210 : Environmental Impact and Prevention analysis for urban Substations

 

PS3 : Climate Change: Implications for Electric Power Systems

  • C3-301 : Hydropower plants and the Climate Change: Impacts and Actions
  • C3-302 : Enhancing resilience of the North Indian Power System against pollution and foggy weather - An Experience
  • C3-303 : An approach to dealing with visual impact of existing high voltage transmission lines
  • C3-304 : Reduction of greenhouse gases in GIS pilot project application in UK
  • C3-305 : Climate Change Impact on Electrical Power System, Case study from Jordanian Electrical System

 

SC C4 - SYSTEM TECHNICAL PERFORMANCE

 

PS1 : Impact of inverter based generation and Energy Storage

  • C4-101 : Harmonic Distortion Assessment Related to the Connection of Wind Parks to the Brazilian Transmission Grid
  • C4-102 : Transient Stability Impacts of High Levels of RES on the Western US Grid
  • C4-103 : Utility Connected Smart Inverters – Lessons Learned from Demonstration of Open Standards and Protocols
  • C4-104 : Development of improved aggregated load models for power system network planning in the Nordic power system
  • C4-107 : Voltage Swell Mitigation in EHV Real Network Using Flexible AC Transmission Systems Based on Evolutionary Computing Method
  • C4-108 : Power Quality Monitoring and Assessment in the Spanish Transmission System
  • C4-109 : STORE: A Comprehensive Research and Demostration Project on the Application of Energy Storage Systems in Island Power Systems
  • C4-110 : Power Intensive Energy Storage and Multilevel STATCOM for frequency and voltage grid support
  • C4-111 : Challenges in harmonic assessments of non-linear load connections
  • C4-112 : Amplification of Harmonic Background Distortion in Wind Power Plants with Long High Voltage Connections
  • C4-113 : Power Quality and EMC Issues associated with future electricity networks – status report on behalf of CIGRE/CIRED JWG C4.24
  • C4-114 : Investigation of Harmonics Trends and Characteristics on the Irish Transmission System by analysing Historical PQ Measurements and SCADA Records
  • C4-115 : LARGE SCALE ITALIAN ENERGY INTENSIVE STORAGE INSTALLATION: SAFETY ISSUES AND ENVIRONMENTAL COMPATIBILITY
  • C4-116 : Electrochemical Energy Storage Systems and ancillary services: the Italian TSO's experience
  • C4-117 : Impact of Photovoltaic Power Systems Control on Romanian Power Quality as Measured in the Connection Common Points
  • C4-118 : Assessing Inverter Based Generation Exposure to Voltage Sags
  • C4-119 : Impact of Connecting Renewable Power Plants on the Dynamic Voltage Response, Voltage Stability and Low Voltage Ride Through (LVRT) Capability

 

PS2 : Challenges with modeling and evaluation of lightning performance and insulation coordination in the power system of the future

  • C4-201 : Application of the Leader Progression Model to evaluate the lightning performance of AC and DC EHV transmission lines
  • C4-202 : Overview of statistical data on lightning outages of transmission lines in Japan
  • C4-203 : Economic Assessment of Lightning Performance Improvement of 69 kV Overhead Subtransmission Line on Monopole and Concrete Pole in MEA's Power Distribution System
  • C4-204 : A CASE STUDY AND OBSERVATION ON CAUSE OF TRANSMISSION LINE OUTAGES IN MALAYSIA
  • C4-205 : Assessment of Lightning Shielding Performance of a 400 kV Double-Circuit Fully Composite Pylon
  • C4-207 : Analysis of opportunities to improve the HVDC SwePol Link operation due to commutation failures
  • C4-208 : Investigating the Methodology and Implications of Implementing Long HVAC Cables in the Ireland and Northern Ireland Power System
  • C4-209 : Isolated systems interconnected via HV submarine XLPE cables
  • C4-210 : Switching transients on very long HV ac cable lines: simulations and measurements on the 230 kV malta-Sicily Interconnector
  • C4-211 : ELECTRICAL PERFORMANCE OF 10kV POLYMER INSULATOR UNDER LIGHTNING INDUCED VOLTAGE CONDITION
  • C4-212 : EFFECT OF PARALLEL 275kV TRANSMISSION LINE WITH OIL PIPELINE ON ELECTROMAGNETIC FIELD CALCULATION
  • C4-213 : Measurement Techniques on Transient Process of Lightning Striking Overhead Transmission Lines

 

PS3 : Bridging the gap between EMT , FEM and positive sequence grid simulation

  • C4-301 : Simulating Single-Pole Opening Using a Detailed Protection Model and a Transient Stability Program
  • C4-302 : Development of surge simulation techniques based on the finite difference time domain method and its application to surge analysis
  • C4-303 : Defining - and Computing the Margin in Critical Clearing Time: Eskom experience
  • C4-304 : ''Shunt Compensation, Reliability Analysis and Condition Monitoring System measurements and simulations for an EHV mixed Overhead line - Cable connection
  • C4-305 : HVDC system modeling coherence between EMT and phasor domain tools
  • C4-306 : SOME MEANINGFUL EXAMPLES OF SEQUENCE THEORY USE LIMITATION

 

SC C5 - ELECTRICITY MARKETS AND REGULATION

 

PS1 : Interactions between wholesale and retail markets; the future of regulation

  • C5-101 : Aligning Regulatory Incentives and Price Signals in the Brazilian Wholesale and Retail Electricity Markets
  • C5-102 : Market design of one hour ahead and real time market and implementation of crossregional network operation in Japan
  • C5-104 : A methodology for the analysis of market design at the horizon 2030
  • C5-105 : New approach to congestion management for decentralized market coupling using net export curves

 

PS2 : Market models and regulatory structures in an evolving industry situation

  • C5-201 : Practices for Risk Assessment and Control in the Brazilian Electricity Market: state of the art
  • C5-202 : Market coupling, facing a glorious past?
  • C5-203 : The Importance of a Performance-Based Capacity Market to Ensure Reliability as the Grid Adapts to a Renewable Energy Future
  • C5-204 : HVDC Transmission Scheme for Sustainable Energy Supply
  • C5-205 : Impacts of asset investment of renewable energy on market design and operation
  • C5-206 : Renewable Energy Policy and Barriers under Fluctuation of Energy Price and Economic Growth in Thailand
  • C5-207 : Introduction of Sub-Hourly Market in Power Exchanges and Facilitating Large Scale Renewable Energy Integration in India
  • C5-209 : REGULATORY STUCTURE AND MARKET MODEL IN MALAYSIA WITH THE IMPLEMENTATION OF INCENTIVE BASED REGULATIONS (IBR) AND NEW ENHANCED DISPATCH ARRANGEMENT (NEDA)
  • C5-210 : Mexico ´s Wholesale New Power Market
  • C5-211 : Restructuring System Services for the Highest Levels of Wind Integration
  • C5-212 : Capacity Markets and the EU Target Model – a Great Britain Case Study
  • C5-213 : Capacity Mechanisms: Results from a World Wide Survey
  • C5-214 : Flow-based market coupling in the Central Western European region: Welcome to the market coupling 2.0
  • C5-215 : Techno-economic analysis and simulations of the transmission and distributions systems interactions in different regulatory frameworks
  • C5-216 : Implementation of a Strategic Reserve in Belgium: Product Design and Market Results
  • C5-217 : Study on Key Issues of Direct Trading between Power Users and Plants
  • C5-218 : Capacity market. Change of the model shifting from deficit to excess
  • C5-219 : Evaluating Regulatory Framework in Iran's Electricity Sector: A Benchmarking Analysis

 

PS3 : Distributed resource and demand response integration from the perspective of electricity market structures

  • C5-301 : EVALUATION OF DEMAND SIDE MANAGEMENT MECHANISMS AND OPPORTUNITIES FOR THEIR DEVELOPMENT IN THE BRAZILIAN POWER INDUSTRY
  • C5-302 : Experiences and Lessons Learned based on Distributed Generator of EGCO in Thailand Power Grid
  • C5-303 : Market Access for Renewables in the German Power Market and Market Design Challenges
  • C5-304 : Comparison of market designs enabling DSR participation in the energy market
  • C5-305 : The impact of active demand on the electrical system and its actors estimated wthin the ADVANCED project
  • C5-306 : Project SMART – lessons learned from the emergency DSR programmes involving residential consumers and the aggregator
  • C5-307 : DSO-TSO Interactions in Flexibility Contracting
  • C5-308 : The importance of market regulation in exploiting demand response on balancing market: Slovenian and Austrian case

 

SC C6 - DISTRIBUTION SYSTEMS AND DISPERSED GENERATION

 

PS1 : Integrated planning and operation for up grading distribution networks

  • C6-101 : THE GROWTH OF DISTRIBUTED GENERATION IN BRAZIL: IMPACTS, OPPORTUNITIES AND DIFFICULTIES FOUND
  • C6-102 : Messaging for Enterprise Distributed Energy Resources
  • C6-103 : Learning from a 3.275 MW Utility Scale PV Plant Project
  • C6-104 : Dynamic distribution system planning considering distributed generation and uncertainties
  • C6-105 : A Probabilistic Monte-Carlo Simulation to Assess Distribution Network Reliability
  • C6-106 : Advanced Self-Healing for Wide Area Power Outage and Network Reconfiguration for Feeder Uploading
  • C6-107 : Impact of Distributed Energy Resources and Normally Open Switches on the Operational Performance of Low Voltage Distribution Networks
  • C6-108 : An Adaptive Protection Infrastructure for Modern Distribution Grids with Distributed Generation
  • C6-109 : Protection coordination for distribution systems containing distributed generating units
  • C6-110 : State estimation in MV distribution networks: experience in the Spanish smart grid project PRICE-GDI
  • C6-111 : Linear State Estimation in Low Voltage Grids Based on Smart Meter Data
  • C6-112 : Intelligent control of on-load tap changer based on voltage stability margin estimation using local measurements
  • C6-113 : South East Europe Distribution System Operators Benchmarking Study
  • C6-114 : Key findings of a study into the development of future GB systems integrating low carbon technologies and smart solutions
  • C6-115 : Impact of distributed generation on load shedding scheme in France: current status and perspectives
  • C6-116 : Technical-economic optimum development plan of the Distribution Network of Abidjan
  • C6-117 : Prosumers' Battery Electrical Storage Systems: new ancillary services, impact on network planning and operation
  • C6-118 : Real field testing results of the innovative Medium Voltage control system developed in the Italian Demonstrator of GRID4EU
  • C6-119 : Linear Optimization for Active Distribution Systems Operation Considering Demand Response Mismatch

 

PS2 : Energy infrastructure for urban networks

  • C6-201 : Local Adaptive Control of Solar Photovoltaics and Electric Water Heaters for Real-time Grid Support
  • C6-202 : Towards Holistic Power Distribution System Validation and Testing – An Overview and Discussion of Different Possibilities
  • C6-203 : Optimized and Enhanced Grid Architecture for Electric Vehicles in Europe
  • C6-204 : Leveraging Smart Grids Assets for Building Smart Cities at Marginal Cost
  • C6-205 : Advancing the method of estimating the distribution system condition by utilizing smart meters
  • C6-206 : Beyond Smart Meters: Management of the LV network
  • C6-208 : Planning studies for active distribution grids in presence of EVs charging stations: simulation on areal test network
  • C6-209 : The Integrated Model for Marketing and Distribution Information - Integration Architecture, Implementation and Validation
  • C6-210 : Demonstrations of Communication Standards for Automated Demand Response and Smart Grid

 

PS3 : Microgrids and offgrid hybrid systems

  • C6-301 : NY Prize Community Grid Competition
  • C6-302 : Fast Demand Response as an Enabling Technology for High Renewable Energy Penetration in Isolated Power Systems
  • C6-303 : No Load Diesel Application to Maximise Renewable Energy Penetration in Offgrid Hybrid Systems
  • C6-304 : Business Cases for Isolated and Grid-connected Microgrids – Methodology and Applications
  • C6-305 : Decision and Management to Interconnect Distributed Energy Resources into Distribution Networks
  • C6-306 : Smart Region – Automation of Distribution System
  • C6-307 : Battery Energy Storage Control Strategies for Deterministic and Stochastic Power Profiles
  • C6-308 : Smart grids for rural conditions and e-mobility - Applying power routers, batteries andvirtual power plants 
  • C6-309 : Probabilistic Planning of Multi-Microgrids with Optimal Hybrid Multi-Generation sets
  • C6-310 : The Hybrid Energy Storage System based on lithium-ion batteries and supercapacitors

 

SC D1 - MATERIALS AND EMERGING TEST TECHNIQUES

 

PS1 : Compact Insulation Systems (AC and DC)

  • D1-101 : Solid-gas insulation in HVDC gas-insulated system: Measurement, modeling and experimental validation for reliable operation
  • D1-102 : Interest of simulations to assess tests to be performed on DC GIS
  • D1-103 : Various Characteristics of GIS Insulation Systems and Test Method of Insulating Spacers for Residual DC Voltage
  • D1-104 : Evaluation of small scale testing for high field conductivity of HVDC cable materials
  • D1-105 : LONG TERM PERFORMANCE OF XLPE INSULATION MATERIALS FOR HVDC CABLES
  • D1-106 : Study of dielectric properties of XLPE for HVDC cables during long-term ageing
  • D1-107 : ZnO stress grading tape for stator windings for electrical machines located at higher altitudes
  • D1-108 : DIELECTRIC PERFORMANCE BY ELECTRODE SURFACE PRETREATMENT AND MULTILAYER COATINGS IN GIS
  • D1-109 : Tracking and Erosion Tests for SR Composite Insulators under DC Voltage
  • D1-110 : Long-term performance of composite station insulators with larger diameters: laboratory tracking and erosion test vs. service experience
  • D1-111 : The Effect of Bird Streamers on the Insulation Strength of HVDC Lines
  • D1-112 : Performance of polymeric insulators in hybrid AC/DC overhead lines under polluted conditions
  • D1-113 : GCCIA POLLUTION TEST STATION: An Optimizing Tool for Pollution Site Severity & Selection of Optimum Insulators Profile In Eastern KSA

 

PS2 : New materials

  • D1-201 : Electrical and thermal behaviour of synthetic transformer liquids
  • D1-202 : Preliminary study for use of vegetable esters in big power transformers
  • D1-203 : Molecular Simulation and Experiment of Transformer Cellulose Insulation Paper Modified by Nano Al2O3
  • D1-204 : CHARACTERISTICS OF FLUORONITRILE/CO2 MIXTURE - AN ALTERNATIVE TO SF6
  • D1-205 : Validation method and comparison of SF6 alternative gases
  • D1-206 : Thermoplastics for LV Switchgear Application
  • D1-207 : Preparation of Thermal Conducive Insulating Composite Material Using Electrostatic Adsorption Method
  • D1-208 : Comparative Investigation on Ester Insulating Liquids for High Voltage Applications

 

PS3 : Non-standardised stresses and emerging test techniques

  • D1-301 : Developments for Frequency Response Analysis Automation
  • D1-302 : Diagnostic control of oil-paper insulation based on method of "direct" measurement of paper moisture content
  • D1-303 : Development of a new spectrophotometric method for analysis of 2-furfuraldehyde in transformer oil as an indicator of paper degradation
  • D1-304 : Dissolved Gas Analysis Applied to on Load Tap-Changers
  • D1-305 : A study of liquid-immersed transformer reference insulation systems used to determine thermal class
  • D1-306 : A development of DC PD pattern recognition method using Modified CAPD together with PD founding for Gas insulated apparatus under DC voltage
  • D1-307 : Signal processing and study of the ripple influence in PD patterns for measurements under HVDC stress
  • D1-308 : A Review of Dielectric Strength with Distorted Lightning Impulses
  • D1-309 : Insulation Evaluation of High-voltage Insulation Systems for Actual Overvoltage Waveforms and Practical Field Conditions
  • D1-310 : Correcting the Errors of Large Impulse Ultra High Voltage Dividers with the Deconvolution Method
  • D1-311 : Investigation of mechanical strength for station post composite insulators subjected to variable loads

 

SC D2 - INFORMATION SYSTEMS AND TELECOMMUNICATION

 

PS1 : New applications to control power systems

  • D2-101 : Smart: Intelligent and integrated platform for power operation centers
  • D2-102 : Implementation of PMU-Based Linear State Estimation into Energy Management Systems
  • D2-103 : Leveraging Big Data and Modern Communication Protocols to Facilitate New Applications in Power Transmission and Distribution
  • D2-104 : Implementation of Information and Telecommunication Systems with the aim of Realization of Smart Grid in Japan
  • D2-105 : Communications Infrastructure for Future Centralized Substation Protection and Control Systems
  • D2-106 : Implementation of Online Power System Network Analysis for the EMS in Korean Electric Power Control Center
  • D2-107 : Results of applying a semantic interoperability strategy in Smart Grid applications for DSO in Mexico
  • D2-108 : Classification of customers based on temporal load profile patterns
  • D2-109 : COCO: Operational control of construction
  • D2-110 : Adding New Functions to the Energy Control System for Operating More Than a Decade in Taiwan
  • D2-111 : Portable WAMS – a Paradigm Shift
  • D2-112 : Experiences from Intelligent Alarm Processing and Decision Support Tools in Smart Grid Transmission Control Centers
  • D2-113 : Distributed control architecture for effective Distributed Energy Resources Management
  • D2-115 : Optimizing the Network and the Asset Lifecycle and Reduce Operational and Capital Costs through Predictive Analytics and Asset Health Management
  • D2-116 : Study and Practice of General State Estimation and Load Flow Hybrid Method for Modern Power Systems Control Centers

 

PS2 : EPU response to evolving cyber security landscape

  • D2-201 : Network Architecture and Cyber Security – Two Faces of the Same Coin
  • D2-202 : Cyber Security Architecture for Operational Technologies (ICS/SCADA)
  • D2-203 : Application and Management of Cybersecurity Measures for Protection and Control
  • D2-204 : Application of Monitoring Standards for enhancing Smart Grids Security
  • D2-205 : Fuzzy Rule Based Expert System for SCADA Cyber Security

 

PS3 : Mobile operational applications, systems and infrastructure

  • D2-301 : Wireless and Mobile Systems for Electric Power System Operation in Japan
  • D2-302 : Ensuring Uptime of WAMS Network with the Help of Common IT Tools – Case Studies
  • D2-303 : Communication Networks for Indian Smart Grids
  • D2-304 : Usefulness of AMI data communication systems to the development of Polish DSO smart MV and LV grids with regard to SCADA control systems
  • D2-305 : MAGIC – A Microgrid AGent Intelligent Control Device
  • D2-306 : PLC MV telecommunications: An evolution path for sustainable private telecom networks enabling smart grid applications
  • D2-307 : IT and OT integration to improve outage management
  • D2-308 : Study on Evolution of Communication Infrastructure for Smart Grid Operation and Management
  • D2-309 : MPLS-TP AS PACKET PLATFORM FOR CRITICAL SERVICES IN POWER TRANSMISSION
  • D2-310 : Communication network toward the realization of a new power distribution automatic control system
 

File Size: 1,3 GB

Year: 2016

 
 
 
Download
Member
FREE free
Non member
150€ buy
 

Sponsored content


Your AccountYour Account

 

Join CIGRE now and download this item and all publications for free and much more...