Colloquium - Toronto 2020

Summary

256 – DERMS, Federated Architecture for DER, And the Enabling Standards
257 - Towards an Asset Health Capability
258 - A Frequency Response-Based Renewable Resource Hosting Capacity Method for Isolated Grids
259 - Voltage Regulation Using D-STATCOMs in Rural Distribution Feeders
263 - Emergency Generators for Resilient Response to Natural Disasters
268 - Power Transformer Bushings – Inspection, Testing and Refurbishment
269 - Another Look at the Use of Mobile Unit Substations in Customer Delivery Systems
270 - Distributed Resource Planning Portal, a key PUC requirement for the Utility Companies to give DRP portal access to the public investing in Renewable Energy and Non Wired Alternatives
272 - An Adaptive Fast Load Shedding Scheme for Enhancing Reliability and Stability of an Expanded Liquefied Natural Gas Plant – Lessons Learned
274 - Overpressure test of an arc resistant power transformer
275 - Increasing Dispatchability of a PV Power Plant through Modular Multilevel Converter-Based Embedded Battery Energy Storage (MMC-EBES)
278 - Event-Triggered Dynamic State Estimation in Power Systems Using a Data-Selective Set-Membership Filter
279 - Electrical Tests on Fire Retardant Contaminated Cap and Pin Insulators
281 - Alternative network development – need for flexible solutions for operation and planning of distribution and transmission grids
282 - Hybrid Circulating Current Control of a Modular Multilevel Converter for Primary Frequency Response Support
283 - Challenges during integration of substations for establishment of National Transmission Asset Management Centre (NTAMC) by POWERGRID – A case Study
284 - Auto-DR: High performance communication architecture for automatic acquisition of disturbance record at control centre
285 - Remote Access of Intelligent Electronic Devices and Automatic DR Collection at Centralised Control Centre: A Novel Experience
286 - A Method for Modeling and Testing Modular Multilevel Converters and Their Controls in Large Power System Simulation Studies
287 - Transformer Limited Fault TRV’s field measurements used to validate EMTP transformer models and comparison with TRV calculations based on existing standards (IEEE Std C37.06.1™- 2017 and IEC 62271-100)
288 - Altitude corrections for external insulation design: IEC standards and engineering applications
291 - Comprehensive Studies on Controller Tuning for PSS2B and PSS4B: Challenges, and Straightforward Tuning Approach
294 - A Review of the Protection of Microgrids with Converter-Based Resources
295 - Active and Reactive Power Priority Imposed by Current Limit Logic in Inverter-based Generators
296 - What it takes to design, manufacture and operate power transformers under arctic temperature conditions
298 - Investigation of Wind Farm Padmount Transformer Failure through Transient Studies
299 - Manitoba Hydro Estella Substation, MVROT Pilot Project for the Energy Efficiency and Reduction of Losses in Electrical Power Distribution Grids “The MVROT Project”
300 - GLOW: A Novel Co-simulation Framework for Integrated Distribution Network Planning and Data Analysis using GridLAB-D
301 - Stability Analysis of Inverter-Based Systems with Virtual Inertia Control
302 - IEC 61850-Based FLISR Testing: A Comparative Study using RTDS
303 - Utilizing Community Storage for Virtual Power Plants
304 - Grid Modernization, resilience and hardening – a framework for asset management to allow for practical application
305 - Live Line Working Tool and Framing Design Innovation
308 - Transmission products and systems for utilities of the future – IoT connected, digital twin based, intelligent
309 - Design, Integration, and Testing of a Passive Adaptive Protection System for Microgrid Applications
310 - A Comprehensive Analysis to Create and Operate a Temporary Power System Island – A Real Case Study
311 - Hardware-In-the-Loop Testing of Transient Ground Fault Detection Function for Wildfire Mitigation Applications
313 - The Probabilistic Modeling of Common-Cause Failures and Failure Bunching in a Transmission System Reliability Model
314 - Dynamic Equivalents for RTDS Applications
315 - Be Prepared for the Unexpected: Design to Increase Personal Safety, Reduce Fire and Explosion Risk, and Mitigate Environmental Impact
319 - Communications Modeling: a new approach to Intrusion Detection, Performance and Diagnostics
320 - CIGRE JWG A3.43 progress report “Tools for lifecycle management of T&D switchgear based on data from condition monitoring systems”
321 - Safety in HVDC converter stations
322 - Determination of AC test currents for thermo-electric laboratory stresses on gas-insulated HVDC systems
323 - Permanent Overload Operation of the Hydro-Québec – New England Multiterminal HVDC Interconnection: Simulation Study and Live System Testing
324 - The Use of Absolute Limits for PD Measurements on Stator Windings
325 - Energy consumption estimation through Artificial Intelligence
326 - Analysis of Sub Synchronous Resonant Modes in Series Compensated Networks using Multiple Frequency Scans
329 - Energy Storage as a Tool for Enhanced Reliability: Framework Development and Lessons Learned
332 - Energy Storage Enabled Microgrid Design for Critical Infrastructure
333 - A Review of DC Fault Blocking Converters for HVDC Transmission Systems
341 - Recommended Practice for Designing Insulation to Withstand Ice and Snow on Overhead Transmission lines in
British Columbia
342 - A Step Towards Circuit-Breaker Diagnostics Interoperability
343 - An Analysis of Mechanical Effects of Short Circuit on Strain Bus using Finite Element Approach and Validation by Modelling an Actual Strain Bus subjected to Short Circuit Tests by Comparing Computed Results with Experimental Data
344 - A Finite Element Analysis Approach for Calculating Forces Acting on Station Post Insulators, ‘A’ Frame Assemblies, and Corners of Rigid Bus Due to High Short Circuit Currents and Extreme Wind
346 - Advanced Power Transformer Diagnostics – Detection of Core-Ground Issues
347 - Probability of Transmission Equipment Contingencies in Ontario Power System
352 - Improving Field Operations and Safety with Wearable Technology
354 - Diesel Generator Sizing for Remote Power Systems with Consideration of Renewable Energy
355 - Comparison of Dynamic Characteristics of Virtual Synchronous Machine Control Algorithms
356 - The future of Electrical Signature Analysis (ESA) for machine protection
358 - Cybersecurity Tool Integration Challenges with IEDs in Digital Power Systems
360 - Energy Storage as a Solution for Increasing Feeder Hosting Capacity: Concepts and Analysis Methods
362 - Innovative Solutions and Approaches Taken by North American Utilities in Leveraging Benefits of DERs and Grid Modernization Technologies
369 - Fast Restoration Algorithm for Hybrid HVDC Grids
370 - Segmenting a Network for Increased Reliability and Security Segmenting a Network for Increased Reliability and Security
372 – End Winding Vibration Monitoring of Air Cooled Turbine Generators – The Case Study Continues
373 - Comparison of Unidirectional and Bidirectional charging optimization using a composite EV load model
375 - Control Interaction of Two PV power plants with Volt - Var Control
377 – Utility Energy Savings by Novel Smart Inverter Control of PV Systems, Bess and EV Charging Stations as Statcoms
379 - SMRs-A Solution to Climate Change