Summary
Session Delegates (Members and non-members) : access these materials for free via your Session registration account.
Contents:
Videos
General
- Opening Ceremony
- Opening Panel
- Next Generation Network forum
- Women In Energy forum (2 videos)
SC D1
Group Discussion Meeting 1
Group Discussion Meeting 2
Tutorial D1.67 - Electric performance of new non-SF6gases and gas mixtures for gas-insulated systems
Documents PDF
Session Papers & Posters
- 10129 Simulation of Diffusion Behavior for New Insulating Gases
- 10176 Experience with Electrical Tests in UHVDC System for Safety Quantities Definition for Live Line Working
- 10177 Integrity Evaluation of Thermal Power Plant based on Carbide Precipitation Sequence
- 10178 Methodologies Development for Power Transformers Incipient Faults Prediction Related to Particles Contamination and Bubble Formation
- 10179 Oxidation Susceptibility of Insulating Mineral Oil and Natural Ester at Different Oxygen Concentrations
- 10180 Thermally Upgraded Kraft Paper Performance in Insulating System Using Natural Ester Tested According to IEEE STD C57.100
- 10181 Evaluation of the Electrical Performance of Insulation in High Voltage Equipment Under the Effects of Contaminants Usually Neglected on Ordinary Electric Field Calculations
- 10229 The Analysis for the Diagnosis Method about H2 Gas-Led Issue according to Stray, Catalytic and Chemical Reaction for transformers in Service
- 10269 Development and Implementation of Transformer Condition Monitoring Models for the Interpretation of Sensor and SCADA Data
- 10272 Power generation by unhealthy photovoltaic modules
- 10279 Research on the application of the environmentally friendly insulating gas CF3I in Electric power apparatus
- 10397 Machine Learning Algorithm Trained by the Duval Pentagons - A Simplified DGA Approach
- 10398 Effective Insulation Condition Assessment of HV and EHV Bushings under Critical Environmental and Operational Conditions
- 10399 Aging Assessment of High Accuracy Low Power Voltage Transformer
- 10400 Dielectric Performance of Aramid Pressboard in Insulating Liquid
- 10404 New Crosslinking Technologies for Polyethylene Insulated Power Cables
- 10406 Characterization of Extruded Material System for HVDC Cable Application
- 10498 Ageing Study on Glass Fiber Composite Rod of Silicone Rubber Insulators
- 10499 Acceleration in corona induced degradation of polymeric insulator under low atmospheric pressure
- 10500 Recommendations for IEC 60815-2 based on Functional Performance of Optimized HVCB Porcelain Insulators in Very Highly Polluted Environments
- 10606 Research on the Causes of Damage to High-Voltage Oil-Filled Equipment with a “Gas Blanket”
- 10607 Changing of the Insulating Characteristics of Mixtures (Mineral Oil and Synthetic Ester) During Prolonged Exposure of Elevated Temperature
- 10608 The Degradation Degree Control of the Hydrocarbon Base of Mineral Oils Using the Specific Degradation Marker in their Infrared Spectrum
- 10609 Universal Method for Assessing Oil-Filled Equipment Based on the Results of DGA
- 10610 The Application of Artificial Neural Networks in the Diagnosis of High-Voltage Circuit Breaker
- 10646 Nondestructive Terahertz and Millimeter Wave Imaging for Underfilm Corrosion
- 10647 The Evaluation Method of Static Electrification in Aged Power Transformers Using Cellulose Fibers Suspended in Insulating Oil
- 10648 Development of Sophisticated Cone-Type Insulating Spacer for 245 kV Class GIS by Functional Insulating Materials
- 10649 Nanofiller Dispersion Effect on Insulation Performances of Epoxy Nanocomposite Material: Electroluminescence, Breakdown Strength and Electrical Insulation Lifetime
- 10650 Joint R & D Project on the Development of Electric Power Equipment using new Functional Insulating Materials
- 10684 Diagnostic and testing on GIS voltage dividers for HVDC applications
- 10685 Impact of the residual quartz to the expected lifetime of C-130 alumina porcelain high voltage insulator
- 10828 Test methods and criteria for validation of functional properties of composite insulators related to materials and interfaces
- 10829 Mechanical strength of pressboard materials under dynamic compressive stress
- 10830 On-load tap changer monitoring and protection by extra power loss and circulating current analysis
- 10831 On-load tap changer switching sequence monitoring – comparison of methods
- 10883 Requirements for Ultra High Frequency Partial Discharge Monitoring Systems for Gas Insulated Systems
- 10951 Determination of Gas Solubility Coefficients for Dissolved Gas Analysis (DGA)
- 10982 Differences in ageing pattern and production/consumption of ageing markers in kraft and thermally upgraded papers immersed in mineral and natural ester oil
- 11027 Thermal faults simulation for aramid insulation in liquid immersed power transformers
- 11048 Fingerprinting and testing methods of RTV silicone-coatings for glass insulators
- 11049 Requirements for Artificial Intelligence Platform addressed to Automatic Assessment of Insulation Condition of Indoor and Outdoor Installations through Partial Discharge Monitoring
- 11050 Optimized deployment of online partial discharge monitoring solutions for distribution grids
- 11109 Compatibility of Transformer Materials with Insulating Liquids
- 11110 Requirements, design principles and testing experience with composite voltages on a ±550 kV HVDC GIS voltage divider
- 11111 Use of Multiphysics Simulation Tools for Building a Digital Twin of Power Transformers
- 11112 Novel Fiber Optic Sensor Technology for Determining the DP Value of Insulating Paper for Transformers
- 11113 Experimental investigations on electro-thermal ageing of EPDM for HVDC cable joints
- 11114 Investigations on the long-term performance of Fluoronitrile-containing gas mixtures in gas-insulated systems
- 11115 Contribution to the standardisation of measurement of composite and combined high voltages
- 11116 Impact of Different Blocking Elements on the DC-Impulse Composite Waveform
- 11160 The use of Niobium Pentoxide as a High-Performance Material for Applications in Energy Storage
- 11161 A test setup to find the relation between interfacial pressure and tangential breakdown voltage of epoxy/silicone rubber interface
- 11162 The Use of Machine Learning and Artificial Neural Networks to Recognition of Turning Faults in Power Transformers
Tutorial
Tutorial D1.67 - Electric performance of new non-SF6gases and gas mixtures for gas-insulated systems
Opening Panel - Energy Transition Salient Aspects for the Power Industry
- Session 1 - Energy Transition on Power Equipment
- Session 2 - Changes in Planning and Design of Transmission and Distribution Systems
- Session 3 - Re-designing regulatory & market tools considering sector coupling scenarios
General Report D1
Additional informations
| Publication type | Session Materials |
|---|---|
| Reference | SESSION_2022_D1 |
| Publication year | 2022 |
| Publisher | CIGRE |
| Study committees | Materials and emerging test techniques (D1) |
| Price for non member | 150 € |
| Price for member | Free |
Video
