Thermal monitoring of cable circuits and grid operators' use of dynamic rating systems
The currently predominant technology for thermal measurement on power cables is DTS (Distributed Temperature Sensing) often used in combination with a RTTR (Real Time Thermal Rating) system. Those systems, based on temperature measurement along an optical fibre installed very close to the power cable or embedded allow optimum power cable assets utilization for (normal) operation, emergency and strategic planning purposes. The Technical Brochure discusses the different technologies, their advantages, disadvantages and recent experience with DTS/RTTR.
File Size: 3,2 MB
Pages NB: 4
may download free of charge all publications including most recent ones
may download free of charge publications over three years old and purchase all publications
HOW TO ACCESS TO E-CIGRE?
Click here to read a short guide to setting up your account and obtaining access to the global e-cigre.org website for all technical literature.
Protection requirements on transient response of digital acquisition chain
Test strategy for Protection, Automation and Control (PAC) functions in a fully digital substation based on IEC 61850 applications
Voltage Source Converter (VSC) HVDC for Power Transmission - Economic Aspects and Comparison with other AC and DC Technologies
Update of Service Experience of HV Underground and Submarine Cable Systems
Recommendations for testing of long AC submarine cables with extruded insulation for system voltage above 30 (36) to 500 (550) kV (This TB replaces electra article ELT_189_1)