Guidelines for altitude correction of pollution performance of insulators
The altitude correction for the dimensioning of outdoor insulation became essential when the existing AC and DC transmission systems were being planned for altitudes of up to 5000 m. The majority of the previously known data was limited to altitudes of up to 2000 m. Working Group D1.44 collected and analyzed all available AC and DC data at different altitudes from sea level to 6000 m and including the period of publications of more than 20 years. The respective correction factors are proposed in the TB.
File Size: 2,5 MB
Pages NB: 3
You might also like
may download free of charge all publications including most recent ones
may download free of charge publications over three years old and purchase all publications
HOW TO ACCESS TO E-CIGRE?
Click here to read a short guide to setting up your account and obtaining access to the global e-cigre.org website for all technical literature.
Modelling of inverter-based generation for power system dynamic studies
Ageing high voltage substation equipment and possible mitigation techniques
Asset management for distribution networks with high penetration of distributed energy resources
Guide on use of premium efficiency IE3 (IEC 60034-30) motors & determining benefits of green house gas emission reduction
Recommendations for additional testing for submarine cables from 6 KV (UM=7.2 KV) up to 60 KV (UM = 72.5 KV)
Voltage Source Converter (VSC) HVDC for Power Transmission - Economic Aspects and Comparison with other AC and DC Technologies
Update of Service Experience of HV Underground and Submarine Cable Systems
Recommendations for testing of long AC submarine cables with extruded insulation for system voltage above 30 (36) to 500 (550) kV (This TB replaces electra article ELT_189_1)