SF6 measurement guide
The quality of the SF6 is critical in ensuring the performance of gas insulated switchgear, therefore regular monitoring of the gas is importance. Over the last few years a number of instruments have become available that allow on-site testing of the parameters of SF6 gas, namely SF6 content, humidity and decomposition products. This brochure seeks to provide practical advice regarding the selection and use of these instruments so as to achieve reliable and consistent results. Guidance is also provided in how to assess the results and identifies potential remedial measures. A detailed discussion is included on the historic frost point temperature limit of -5 °C and how alternative limits may be more appropriate in certain situations.
File Size: 2,5 MB
Pages NB: 4
You might also like
may download free of charge all publications including most recent ones
may download free of charge publications over three years old and purchase all publications
HOW TO ACCESS TO E-CIGRE?
Click here to read a short guide to setting up your account and obtaining access to the global e-cigre.org website for all technical literature.
Factory quality assurance testing requirements for turbo-generator components - stator bars
Reliability standards and market rules related to maintaining reliability and market efficiency
Reliability analysis and design guidelines for LV DC auxiliary systems
State of the art of stator winding supports in slot area and winding overhang of hydro generators
Voltage Source Converter (VSC) HVDC for Power Transmission - Economic Aspects and Comparison with other AC and DC Technologies
Update of Service Experience of HV Underground and Submarine Cable Systems
Recommendations for testing of long AC submarine cables with extruded insulation for system voltage above 30 (36) to 500 (550) kV (This TB replaces electra article ELT_189_1)
Guide to procedures for estimating the lightning performance of transmission lines.